Operation; Starting The Engine; Stopping The Engine - Toro 38515 Operator's Manual

Operation

Note: Determine the left and right sides of the
machine from the normal operating position.

Starting the Engine

1. Turn the ignition key
clockwise to the On
position.
2. Move the choke
lever to the right.
3. Firmly push in the
primer 2 times with your
thumb, holding the
primer in for a second
before releasing it each
time.
4. Pull the recoil
starter.
5. With the engine running, move the choke lever to
the left slowly.

Stopping the Engine

To stop the engine, turn the ignition key
counterclockwise to the Off position.
m-6189
m-6108a
m-6109a
m-6192
3351-827 Rev A
8
Starting the Rotor Blades
To start the rotor blades, hold the control bar against
the handle.
Stopping the Rotor Blades
To stop the rotor blades, release the control bar.
Adjusting the Discharge
Chute
To adjust the discharge chute, move the chute handle
(A) and the chute deflector handle (B) as shown.
B
A
m-6193
m-6118
m-6107