Quick Reference - Graco D Series Operation, Parts

Reference

Quick Reference

Page 8 Name
A Prime/Spray Valve
B PushPrime Button
C Pressure Control Knob
D ON/OFF Switch
E Suction Tube/Hopper
F Drain Tube
G Airless Spray Gun
H Reversible Spray Tip
J Tip Guard
K Gun Trigger Lock (page 11)
L Gun Fluid Inlet Fitting
M Gun Fluid Filter
N ProXChange Pump
P Pump Fluid Outlet Fitting
Q Airless Hose
R InstaClean
S Pail Hanger
T Inlet Strainer
U Power Cord
V Easy Access Door
W Suction/Drain Tube Cup
X Pump Removal Tool
Z Inlet Valve Removal Tool
Power Flush Attachment
24
™
Fluid Filter
Description
•
In PRIME position directs fluid to drain tube.
•
In SPRAY position directs pressurized fluid to
paint hose.
•
Automatically relieves system pressure in over-
pressure situations.
Taps the inlet ball when pushed to loosen it.
Increases (clockwise) and decreases
(counter-clockwise) fluid pressure in pump, hose,
and spray gun. To select function, align symbol on
pressure control knob with setting indicator, page
12.
Turns sprayer ON and OFF.
Draws fluid from paint pail into pump.
Drains fluid in system during priming and pressure
relief.
Dispenses fluid.
•
Atomizes fluid being sprayed, forms spray pattern
and controls fluid flow according to hole size.
•
Reverse position unclogs plugged tips without
disassembly.
Reduces risk of fluid injection injury.
Prevents accidental triggering of spray gun.
Threaded connection for airless hose.
Filters fluid entering spray gun to reduce tip clogs.
Pumps and pressurizes fluid and delivers it to paint
hose.
Threaded connection for airless hose.
Transports high-pressure fluid from pump to spray
gun.
•
Filters fluid coming out of pump to reduce tip plug-
ging and improve
finish.
•
Self cleans only during pressure relief.
For transporting pail by its handle.
Prevents debris from entering pump.
Plugs into power source.
Easy Access Door permits quick access to the
pump. Open pump door by pulling out on the tabs
while sliding door away from the pump inlet.
Holds suction and drain hoses.
Use cut out in the frame to remove/install pump
packing.
Cut out in the frame provide the tools to quickly
remove/install the inlet valve without additional tools.
Connects garden hose to suction tube for power
flushing water-based fluids.
3A3234E