Using The Line Menu - VTech ErisTerminal VSP716A Administrator And Provisioning Manual

Using the Line menu

Use the Line menu to configure line-specific settings for the phone.
To use the Line setting menu:
1. From the Admin Settings menu, press
The Line menu appears.
2. Highlight the desired line, if necessary, by pressing
The full configuration menu for that line appears.
You can configure:
Account label

Display name

User ID

Authorization ID

Authorization Password

SIP Registrar Server IP

Registrar Server port

Proxy server IP

Proxy server port

Register (Yes or No)

Answer page (Manual or Auto)

For more information about these settings, see
3. Edit the Line settings using the dial pad and the soft keys available for each setting:


using the dial pad. The soft key does not appear when the setting accepts numbers
only.


Configuration Using the Phone Menus
Backspc —deletes a character
123 —enables you to enter numbers, lower case letters, or upper case letters
Save —saves and applies the new settings
Edit —enables you to edit the setting (appears for the Password setting)
VSP716A Administrator and Provisioning Manual

to highlight Line, and then press SELECT.

, and then press SELECT. 
"SIP Account Management" on page
31
41.
Back to Contents