Using The Network Setting Menu - VTech ErisTerminal VSP716A Administrator And Provisioning Manual

Using the Network Setting menu

Use the Network setting menu to configure network-related settings for the VSP716A. For
more information about these settings, see
"Advanced Network Settings" on page
To use the Network setting menu:
1. From the Admin Settings menu, press
then press MENU/SELECT.
The Network setting menu appears.
2. Press
IPv4





IPv6




VLAN ID

To set the network mode:
1. From the Network setting menu, press
or IPv6), and then press MENU/SELECT.
The selected network type screen appears (IPv4 menu shown below).
2. With Mode selected, press
The Mode menu appears.
Configuration Using the Phone Menus
 
or to highlight the desired option, and then press MENU/SELECT:
Mode (DHCP, Static IP, PPPoE, Disabled)
Set static IP
Set static DNS
Set PPPoE (Point-to-Point Protocol over Ethernet)
Mode (Disabled, Auto, Static IP)
Set static IP
Set static DNS
Select
VSP716A Administrator and Provisioning Manual
"Basic Network Settings" on page 76
78.
 
or to highlight Network setting, and
 
or to highlight your network type (IPv4
.
28
and
Back to Contents