Mac-Specific Configuration File Settings - VTech ErisTerminal VSP716A Administrator And Provisioning Manual

Setting:
Description:
Values:
Setting:
Description:
Values:

MAC-specific configuration file settings

Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
VSP716A Administrator and Provisioning Manual
network.pc_port.enable
Enable or disable the PC port to operate in hub/switch mode (depending
on the Enable PC Port Mirroring setting).
0 (disabled), 1 (enabled)
network.pc_port.mirroring.enable
When the PC port is enabled, enable PC Port Mirroring to set the port to
operate in hub mode (network traffic on the WAN port is reflected in the
PC port). When Port Mirroring is not enabled, the port operates in switch
mode.
0 (disabled), 1 (enabled)
network.ip.mode
Sets the IPv4 network mode.
disable, dhcp, static, pppoe Default:
network.ip.static_ip_addr
Sets a static IP address for the network.
Text string (IPv4)
network.ip.subnet_mask
Sets the subnet mask for the network.
Text string (IPv4)
network.ip.gateway_addr
Sets the Gateway IP address.
Text string (IPv4)
network.ip.dns1
Sets the primary DNS server IP address.
Text string (IPv4)
141
Default: 1
Default: 0
dhcp
Default:
Blank
Default: Blank
Default: Blank
Default: Blank
Back to Contents