Table of Contents
Advertisement
log Module: System Log Settings
The log settings control system logging activities. System logging may be required for
troubleshooting purposes. The following logging modes are supported:
Serial/Console—system log output to an external console using a serial/RS-232
cable
Syslog server—output to a log file on a separate server
Volatile file
The log settings follow the format: log.[element].
All the log settings are included in the general configuration file.
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
VSP716A Administrator and Provisioning Manual
log.syslog_enable
Enables or disables log output to syslog server.
0 (disabled), 1 (enabled)
log.syslog_server_address
Sets the syslog server IP address.
IPv4, IPv6 or FQDN
log.syslog_server_port
Sets the syslog server port.
1–65535
log.syslog_level
Sets the log level. The higher the level, the larger the debug output.
5—all
4—debug
3—info
2—warning
1—error
0—critical
0–5
155
Default:
0
Default:
Blank
Default:
514
Default:
2
Back to Contents
Advertisement
Table of Contents
