Product Overview; Controls - Toro 74408 Operator's Manual

Product Overview

1. Side discharge chute
2. Height-of-cut selection pin

3. Controls

4. Motion control lever
Controls
Become familiar with all the controls before you start the
engine and operate the machine (Figure 3 and Figure 4).
Figure 3
5. Fuel cap (both sides)
6. Parking brake lever
7. Mower deck
8. Front caster wheel
114–3556
1. Ignition switch
2. Hour meter
3. PTO Switch
Battery Indicator Light
When the ignition key is initially turned to the On
position for a few seconds, the battery voltage will be
displayed in the area where the hours are normally
displayed.
The battery light turns on when the ignition is turned
on and when the charge is below the correct operating
level (Figure 5).
10
Figure 4
4. Choke lever
5. Throttle control