Maintenance; Recommended Maintenance Schedule(S); Lubrication; Greasing And Lubrication - Toro 74408 Operator's Manual

With a 34in or 40in 7-gauge side discharge mower
Hide thumbs Also See for 74408:
Table of Contents

Advertisement

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
After the first 250 hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 100 hours
Every 150 hours
Every 200 hours
Every 500 hours
Yearly
Important: Refer to your Engine Operator's Manual for additional maintenance procedures.
If you leave the key in the ignition switch, someone could accidently start the engine and seriously
injure you or other bystanders.
Remove the key from the ignition and disconnect the wire from the spark plug(s) before you do any
maintenance. Set the wire aside so that it does not accidentally contact the spark plug.

Lubrication

Greasing and Lubrication

Lubricate the machine when shown on the Check
Service Reference Aid decal (Figure 22). Grease more
Maintenance Procedure
• Check for any loose fasteners and tighten them.
• Change the engine oil.
• Tighten the wheel lug nuts.
• Check the hydraulic fluid.
• Change the hydraulic filters and oil.
• Check the safety system.
• Check the engine oil level.
• Clean the air intake screen.
• Check the brake.
• Check the mower blades.
• Clean the mower deck.
• Clean foam air cleaner element. (more often in dirty or dusty conditions)
• Check the paper air cleaner element. (more often in dirty or dusty conditions)
• Check the tire pressure.
• Check pump drive belt.
• Check the hydraulic fluid.
• Change the engine oil. (more often in dirty or dusty conditions)
• Check the spark plugs.
• Check and clean engine cooling fins and shrouds.
• Inspect all belts for cracks and wear.
• Lubricate the machine with light oil
• Replace the paper air cleaner element.
• Replace the oil filter
• Replace the fuel filter.
• Adjust the caster pivot bearing.
• Grease the front caster pivots (more often in dirty or dusty conditions)
• Lubricate the caster wheel hubs.
• Change the hydraulic filters and oil.
frequently when operating conditions are extremely
dusty or sandy.
Grease Type: General-purpose grease.
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

74408cp7440974409cpZ300 z master

Table of Contents