Product Overview; Controls - Toro 30447 Operator's Manual

Product Overview

Controls

Note: Determine the left and right sides of the machine
from the normal operating position.
CAUTION
This machine produces sound levels in excess of 85
dBA at the operators ear and can cause hearing loss
through extended periods of exposure.
Wear hearing protection when operating this
machine.
Traction Pedal
To stop, reduce your foot pressure on the traction pedal
and allow it to return to the center position (Figure 2).
1. Brake pedals
2. Pedal locking latch
3. Space for optional
accessory
4. Space for optional
accessory
5. Parking brake latch
Brake Pedals
Two foot pedals Figure 2 operate individual wheel brakes
for turning assistance, parking, and to aid in obtaining
better side hill traction. A latch connects the pedals for
parking brake operation and transport.
Pedal Locking Latch
The pedal locking latch Figure 2 connects the pedals
together to engage the parking brake.
Figure 2
6. Fuel gauge
7. Hazard light switch (GM
4100 only)
8. Tilt steering lever
9. Traction pedal
Tilt Steering Lever
Press the lever Figure 2 down to tilt the steering wheel
to the desired position. Then release the lever to lock
the adjustment.
Parking Brake Latch
A knob on the left side of the console actuates the
parking brake lock (Figure 2). To engage the parking
brake, connect the pedals with the locking latch, push
down on both pedals, and pull the parking brake latch
out. To release the parking brake, press both pedals until
the parking brake latch retracts.
Fuel Gauge
The fuel gauge (Figure 2) indicates the level of fuel in
the tank.
Hazard Light Switch (GM 4100 only)
Press the hazard light switch (Figure 2) to activate the
hazard lights.
Speed Limiter
If desired, the screw can be adjusted (Figure 3) to limit
the amount the traction pedal can be depressed in the
forward direction to limit the mowing speed.
1. Speed limiter
Important: When in the mow position, the speed
limiter screw must stop the traction pedal before the
15
Figure 3