Toro 74408 Operator's Manual page 11

1. Safety interlock symbols
2. Battery light
Using the Hour Meter
The hour meter (@@@5) records the number of hours
the engine has operated. It operates when the engine
is running. Use these times for scheduling regular
maintenance.
Throttle Control
The throttle control is variable between Fast and Slow.
Choke
Use the choke to start a cold engine.
Blade Control Switch (PTO)
The blade control switch (PTO) is used to engage
the electric clutch to drive the mower blades with the
right side motion control lever in the center, un-locked
position. Pull the switch up to engage the blades and
release. To disengage the blades, push the blade control
switch (PTO) down or move or release the right side
motion control lever into the neutral lock position.
Ignition Switch
This switch is used to start the mower engine and has
three positions: Off, Run and Start.
Motion Control Levers
The motion control levers are used to drive the machine
forward, reverse, and turn either direction.
Using the Fuel Shutoff Valve
The machine has 2 fuel tanks, one on the left side and
the other on the right side. Each tank connects to a
check valve and then to a tee. From there a common
fuel line leads to the engine (Figure 6).
Figure 5
3. Hour meter
Close the fuel shutoff valve before transporting or
storing the machine.
1. Fuel shutoff valve
Attachments/Accessories
A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
11
Figure 6