Toro 74408 Operator's Manual page 9

Manufacturer's Mark
1. Indicates the blade is identified as a part from the original
machine manufacturer.
109-2463
112-3836
112-3850
1. Sliding and loss of control hazard and tipping hazard,
drop-offs—do not operate the machine near drop-offs,
slopes greater than 15 degrees, or water; keep a safe
distance from drop-offs; do not turn sharply while traveling
fast, instead, slow down and turn gradually.
1. Pull tow bypass levers
rearward and then out to
lock into place.
1. Warning—read the Operator's Manual for more information.
2. Poison hazard; caustic liquid/chemical burn hazard—keep
children away from the battery.
3. Explosion hazard—no fire, open flames, or smoking; avoid
sparks.
1. Warning—read the Operator's Manual.
2. Cutting/dismemberment hazard, fan and entanglement
hazard, belt—stay away from moving parts.
1. Read the Operator's
Manual.
2. Read the instructions
before servicing or
performing maintenance.
9
112-3854
2. Push the machine.
112-3856
112-3857
112-3858
3. Remove the ignition key
before adjusting the height
of cut.
4. Height of cut settings.