Toshiba E-STUDIO352 Printing Manual page 327

Page Length
The number of lines to print on a page can be specified with the following option.
Alternate
Option Value
Value
pl=value
As this equipment is a page printer we cannot change the physical length of a piece of paper so
the actual effect of this command is to change the value for lines per inch so that the requested
number of lines is printed on the page. The actual page length may differ from this value if the
top margin or the text length option is used.
If this option is not specified the PJL command will not be sent so the printer's default value will
be used. The minimum page length allowable is 5. If value is less than 5 page length is set to 5.
The command to specify 66 lines per page is "lp -o pl=66 filename".
Halftone
The halftone can be selected using the following options.
Alternate
Option Value
Value
halftone=AUTO
halftone=DETAIL
halftone=
SMOOTH
Example: The command to set the auto halftone for the print job is
"lp -o halftone=AUTO filename"
Description
Set the lines per page to value.
Description
Set the proper halftone depending on the contents in
the document automatically.
Set the halftone in detail.
Set the halftone smoothly.
Printing from an Application 325