Toshiba E-STUDIO352 Printing Manual page 325
Multifunctional digital systems
Hide thumbs
Also See for E-STUDIO352:
- Network fax manual (126 pages) ,
- Quick start manual (92 pages) ,
- Service handbook (764 pages)
Table of Contents
Advertisement
Page Layout
The booklet mode page layout can be selected using the following options.
Alternate
Option Value
Value
left2right=off
OFF
left2right=on
ON
If left2right=off then long edge binding is selected, otherwise if left2right=on then short edge
binding is used.
Example: The command to select left to right page layout for booklet printing mode is
"lp -o left2right=on filename".
Center Margin
The booklet mode center margin can be selected using the following options.
Alternate
Option Value
Value
centermargin
=value
Example: The command to select the center margin value for booklet printing mode is
"lp -o centremargin=value filename".
Description
Select right to left page layout for booklet printing mode.
This value decides the layout of the pages in the book-
let.
If this value is OFF then the layout of pages is Right to
Left as shown in the figure below.
Select left to right page layout for booklet printing mode.
This is the default setting.
If the value is ON then the layout of the pages is from
Left to Right as shown in the figure below.
Description
Select the center margin value for booklet printing
mode.
This value specifies in pixels the Center Margin or the
"Gutter". This is in addition to the center margin already
specified by the application. The valid range for value is
0 - 300. Default is 0.
Printing from an Application
323
Advertisement
Table of Contents
