Toshiba E-STUDIO352 Printing Manual page 297

— DC (Department Code)
In the DC menu, you can specify your department code, if this equipment is enabled the depart-
ment codes. Before specifying the department code, you must check the Department Code
option in the Printing Modes menu. Then specify the department code in this menu.
1
2
3
4
5
How the equipment performs printing for an invalid department code print job, which no depart-
ment code or invalid department code is specified, varies depending on the Department Code
Enforcement setting that can be set from TopAccess Administrator mode. When the Depart-
ment Code Enforcement is set to "ON", the invalid department code print job will be stored in the
invalid department code print job list without printing. When the Department Code Enforcement
is set to "Print", the invalid department code print job will be printed. When the Department
Code Enforcement is set to "Delete", the invalid department code print job will be deleted without
printing.
1) Department Code (DC) - Digit 1
Select the first digit of the department code.
2) Department Code (DC) - Digit 2
Select the second digit of the department code.
3) Department Code (DC) - Digit 3
Select the third digit of the department code.
4) Department Code (DC) - Digit 4
Select the forth digit of the department code.
5) Department Code (DC) - Digit 5
Select the fifth digit of the department code.
Printing from Application on Mac OS X 10.2.4 to Mac OS X 10.4.x 295