terminal monitor
terminal trapping
tftp get
tftp put
undelete
xmodem
Table 4 System View
<4500>sys
Command
acl number
am enable
am trap enable
arp check enable
arp static
arp timer aging
change unit-id
change self-unit
command-privilege level
copy configuration
cut connection
delete static-routes all
dhcp-security
dhcp-server ip
domain
dot1x
dot1x authentication-method
dot1x dhcp-launch
dot1x max-user
dot1x port-control
dot1x port-method
dot1x quiet-period
dot1x retry
Enable the log debugging/log/trap on the terminal
monitor
Enable terminal trap information display
Download a file from the specified directory of the
TFTP server
Upload a file from the Switch to the specified
directory on the TFTP server
Recover a deleted file
Establish an xmodem connnection
Description
Define ACL identified by a number or a name, and
then enter the corresponding ACL view (See
Table 19, "ACL View," on page
Enable the access management function
Enable the access management trap
Enable the checking of ARP entries
Configure the static ARP mapping entries in an ARP
mapping table
Configure the dynamic ARP aging timer
Change the ID of the Switch
Change the ID of the Switch
Specify the command level
Copy source port configuration to destination port
Disconnect a user or a category of users by force
Delete all the static routes
Specify DHCP (Dynamic Host Configuration Protocol)
relay security configure information
Configure the IP address of the DHCP Server used by
the DHCP Server group
Configure an ISP domain or enter the view of an
existing ISP domain
Specify 802.1x configuration information
Specify authentication method for 802.1x users
Trigger system authentication when receiving DHCP
packet(s)
Specify maximal on-line user number per port
Specify port authenticated status
Specify port controlled method
Enable quiet period timer
Specify maximal request times
9
Administration -> Restore
Configuration
Administration -> Backup
Configuration
Web Command
Device -> ACL
Security-> Authorized IP
22)
Device -> IP Route
Need help?
Do you have a question about the SUPERSTACK 3 4500 and is the answer not in the manual?
Questions and answers