3Com SUPERSTACK 3 4500 Quick Reference Manual page 15

speed
stopbits
user privilege level
Table 7 VTY User-interface View
[4500]user-interface
Command
protocol inbound
Table 8 Public Key Edit View
[4500]rsa peer-public-key switchxxx
(where xxx is the Switch number)
Command
public-key-code begin
public-key-code end
Table 9 Public Key View
Command
peer-public-key end
Table 10 FTP Client View
<4500>ftp xxx.xxx.xxx.xxx
(where xxx.xxx.xxx.xxx is the IP address of the FTP server)
Command
ascii
binary
bye
cd
cdup
close
delete
Specify the transmission rate on the AUX (Console)
port in bit/s
Configure the stop bits on the AUX (Console) port
Configure which level of command a user can use
after logon from a specific user interface
Description
Configure the protocols supported by a designated
user interface
Description
Enter public key edit view (See
Edit View," on page 15)
Save the configured public key and return to the
public key view
Description
Finish editing peer public key and quit from public
key view to system view
Description
Configure FTP data transmission mode as ASCII
mode
Configure FTP data transmission mode as binary
mode
Disconnect with the remote FTP Server and return to
user view
Change the working path on the remote FTP server
change working path on the FTP server to the next
level up in the directory structure
Terminate the control connection and data
connection with the FTP Server and remain in FTP
client view
Delete a file on the FTP server
15
Web Command
Web Command
Table 8, "Public Key
Web Command
Web Command