3Com SUPERSTACK 3 4500 Quick Reference Manual page 2

The command is placed before the command you wish to undo, for example,
■ undo
authentication
<CTRL A> places the cursor back to the start of the command line.
■
Enter the first few characters of a command and press TAB to enter the full command without
■
having to input the entire command (where there is only one command that starts with the
entered characters).
Use the Up Arrow key at the prompt to repeat the previous command string.
■
Use the Delete key to delete the character after the cursor; the Backspace key deletes the charac-
■
ter before the cursor.
When entering physical port numbers, Enter the port number as
■
number and z is the physical port number.
Further Information
For further information about how to use the command line interface, refer to the Command
Reference Guide and the Configuration Guide, which are both available as PDF documents on the
CD that accompanied the unit.
Menus
This section provides a summary of menus and commands supported by the agent for each of the
supported hardware platform variants. Any matching web commands available in the web interface
are also shown.
Commands marked with '*' are available on the Switch 4500 PWR only.
Table 1 Command Line Editing
<Ctrl+A>
<Tab>
Table 2 Commands Available in Any View
Command
?
display
display acl
display am
display arp
display arp timer aging
display boot-loader
display channel
display clock
display config-agent
password.
Moves the cursor to the start of the command line
Command completion
Description
Help
Display current system information
View detailed configuration information about the
ACL
View the status of access management function
View the ARP mapping table
View the current setting of the dynamic ARP map
aging timer
View the APP file used for this boot and the one
that will be used at next boot
View details about the information channel
View the date and time
View statistics of the configuration agent
2
x/0/z
undo set
, where x is the unit
Web Command