3Com SUPERSTACK 3 4500 Quick Reference Manual page 18

Table 13 ISP Domain View
[4500]domain test
Command
access-limit
accounting optional
idle-cut
messenger
radius-scheme
scheme
self-service-url
state
Table 14
VLAN View
[4500]vlan 2
Command
description
igmp-snooping
port
Table 15 VLAN Inteface View
[4500]interface vlan 2
Command
description
dhcp-server
enable snmp trap
ip address
ip address dhcp-alloc
rip authentication-mode
rip input
rip metricin
18
Description
Configure a limit to the amount of supplicants in
the current ISP domain
Enable the selection of RADIUS accounting option
Configure the user template in the current ISP
domain
Specify messenger service of domain
Configure the RADIUS server group used by the
current ISP domain
Configure the AAA scheme to be referenced by the
current ISP domain
Specify self-service URL (Uniform Resource Locator)
of domain
Configure the state of the current ISP domain
Description
Configure a description for the current VLAN or
VLAN interface
IGMP snooping
Add ports to or delete ports from VLAN
Description
Configure a description for the current VLAN or
VLAN interface
Configure corresponding DHCP Server Group of a
VLAN Interface
Enable SNMP traps on an interface
Configure an IP address for VLAN interface
Configure a VLAN interface to obtain IP address
using DHCP
Configure RIP-2 authentication mode and its
parameters
Allow an interface to receive RIP packets
Configure the additional route metric added to the
route when an interface receives RIP packets
Web Command
Web Command
Device -> VLAN
Device -> VLAN
Web Command
Administration -> IP Setup
-> Device -> VLAN Interface
Administration -> IP Setup
-> Device -> VLAN Interface