4.2.2
Inverter Board
Disassembly
1. Place the panel face down on the foam bars, and locate the
Inverter board.
2. Remove the cover screws, and remove the cover.
Figure 4-9 Remove Inverter cover
3. Unplug the lamp connectors on the inverter. Start at the
top, and be careful not to pull and drag the wires. The use
of a pair of pliers can be helpful.
Figure 4-10 Remove Inverter connectors
4. Remove the Inverter board as shown in figure below.
Figure 4-11 Remove Inverter board
Mechanical Instructions
H_16900_029.eps
110707
H_16900_010.eps
110707
H_16900_030.eps
110707
LCD AUO 2k7
Reassembly
To reassemble, perform all processes in reverse order.
4.
EN 7