EN 14
4.
LCD AUO 2k7
4.6
Model T315XW02VD01
4.6.1
Control Board
Disassembly
1. Place the panel face down on the foam bars, and locate the
Control board.
Figure 4-36 Control board location
2. Remove the four screws of the metal cover: start with the
right-down one, then the left-up, one, then the right-up one
and finally the left-down one.
3. Lift the cover from the Control board.
Figure 4-37 Lift cover
4. Carefully disconnect the flat cable/FPCs from their
connectors.
Figure 4-38 Unplug FPCs
5. You can now remove the Control Board.
Mechanical Instructions
I_17791_042.eps
240808
I_17791_043.eps
240808
I_17791_044.eps
240808
Reassembly
To reassemble, perform all processes in reverse order.
Important: Be sure to insert the FPCs correctly: the (white) line
must be invisible when inserted correctly (see figure below).
Figure 4-39 Correct FPC insertion
H_16900_007.eps
110707