Philips T260XW02V4 Service Manual page 19

4.8.2 Inverter Board
Disassembly
1. Place the panel face down on the foam bars, and locate the
Inverter board.
2. Remove the cover screws, and remove the cover.
Figure 4-58 Remove Inverter cover screws
Figure 4-59 Remove Inverter cover
3. Unplug the lamp connectors on the inverter. Start at the
top, and be careful not to pull and drag the wires. The use
of a pair of pliers can be helpful.
Figure 4-60 Remove Inverter connectors
Mechanical Instructions
4. Remove the Inverter board.
5. Unplug connector CN2 on the Inverter board.
Reassembly
To reassemble, perform all processes in reverse order.
I_17791_051.eps
240808
I_17791_052.eps
240808
I_17791_053.eps
240808
LCD AUO 2k7
Figure 4-61 Remove connector CN2
4. EN 19
I_17791_054.eps
240808