Philips T260XW02V4 Service Manual page 11

4.4.2 Inverter Board
Disassembly
1. Place the panel face down on the foam bars, and locate the
Inverter board.
2. Remove the cover screws, and remove the cover.
Figure 4-23 Inverter cover screw locations
Figure 4-24 Remove Inverter cover
3. Unplug the lamp connectors on the inverter. Start at the
top, and be careful not to pull and drag the wires. The use
of a pair of pliers can be helpful.
Figure 4-25 Remove Inverter connectors
4. Unplug the supply connector on the end of the inverter and
remove the Inverter board.
Figure 4-26 Remove supply connector
Mechanical Instructions
H_16900_024.eps
110707
H_16900_023.eps
110707
H_16900_010.eps
110707
H_16900_025.eps
110707
LCD AUO 2k7
Reassembly
To reassemble, perform all processes in reverse order.
4. EN 11