Philips T260XW02V4 Service Manual page 20

EN 20 4. LCD AUO 2k7
4.9 Model T420HW01V2
4.9.1 Control Board
Disassembly
1. Place the panel face down on the foam bars, and locate the
Control board.
Figure 4-62 Control board location
2. Remove the four screws of the metal cover: start with the
right-down one, then the left-up, one, then the right-up one
and finally the left-down one.
Figure 4-63 Cover screws removal
3. Lift the cover from the Control board.
Figure 4-64 Lift cover
Mechanical Instructions
H_16901_013.eps
171007
H_16901_014.ep s
171007
H_16901_015.eps
171007
4. Carefully disconnect the flat cable/FPCs from their
connectors.
Figure 4-65 Unplug FPCs
5. You can now remove the Control Board.
Reassembly
To reassemble, perform all processes in reverse order.
Important: Be sure to insert the FPCs correctly: the (white) line
must be invisible when inserted correctly (see figure below).
Figure 4-66 Correct FPC insertion
H_16901_016.ep s
171007
H_16900_007.eps
110707