4.9.2
Inverter Board(s)
Disassembly Master Inverter
1. Place the panel face down on the foam bars, and locate the
Inverter board.
2. Remove the cover screws, and remove the cover.
Figure 4-67 Remove Inverter cover screws
3. Unplug the lamp connector on the inverter. Be careful not
to pull and drag the wires. The use of a pair of pliers can be
helpful.
Figure 4-68 Remove Inverter connectors
4. Unplug connector on the Inverter board (see figure below),
and remove the inverter panel.
Figure 4-69 Remove connector
Mechanical Instructions
Reassembly Master Inverter
To reassemble, perform all processes in reverse order.
H_16901_018.eps
171007
H_16901_019.eps
171007
H_16901_020.ep s
171007
LCD AUO 2k7
4.
EN 21