Display Definitions - Honeywell LYNX Touch L5200 Series User Manual

Display Definitions

ICON TEXT
Ready to Arm
Armed Away
Armed Stay
Exit Now
28 Seconds
Alarm
Fault (Zone
No.&
Description)
OR
Fire OR
Fire Alarm
95 Fire
Alarm 96
Medical
Alarm 99
Police
CO Alarm
Cover
Tamper
Reporter
Failure
Displayed along with the the text "Ready To Arm" when system is Disarmed and
ready to arm.
"Armed Away" is displayed along the top of the screen. An armed away icon
along with "Armed Away" is displayed after the exit delay expires.
"Armed Stay" is displayed along the top of the screen. An armed stay icon along
with "Armed Stay" is displayed after the exit delay expires.
"Armed Stay – Exit Now" or "Armed Away – Exit Now" is displayed in a red
status bar along the top of the screen. An exit icon along with "Exit Now" and the
time remaining (i.e.; "28 Seconds") is displayed during the exit delay.
"Alarm" is displayed in a red status bar along the top of the screen. An alarm
(bell) icon along with "Alarm" is displayed alternately with the Zone that has
caused the alarm.
"Not Ready To Arm – Fault" is displayed in a yellow status bar along the top of
the screen. An open windowor door icon along with the zone descriptor and
"Window" or "Door" is displayed when a window or entry/exit fault has been
detected.
OR
Displayed alternately with the alarm (bell) icon and "Alarm".
"Alarm" is also displayed in a red status bar along the top of the screen.
The fire icon is displayed with alternating text "Fire" and "Fire Alarm 95 Fire".
"Fire Alarm" is also displayed in a red status bar along the top of the screen.
The Medical icon displayed when a medical alarm is activated. "Alarm" is also
displayed in a red status bar along the top of the screen. (If programmed for
display by your installer)
The alarm (bell) icon when a burglary alarm is activated. "Alarm" is also
displayed in a red status bar along the top of the screen. (If programmed for
display by your installer) No display if 24 Hour Silent Response Type has been
programmed.
Displayed alternately with Carbon Monoxide when a CO alarm is activated.
"CO Alarm" is also displayed in a red status bar along the top of the screen.
A check system icon along with "Cover Tamper" is displayed when a cover
tamper has been detected. "Ready To Arm – System Trouble" is displayed in a
yellow status bar along the top of the screen.
The system has identified a problem with the telephone dialer.
– 11 –
6<67(0 29(59,(: 6< 6< 6<
$ERXW WKH 'LVSOD\ DQG ,QGLFDWRUV
DEFINITION
67(0 29(59,(: 67(0 29(59,(: 67(0 29(59,(: