Brother HL-L6250DW Online User's Manual page 334

Level 1 Level 2
WLAN WLAN Status
MAC Address
Set to Default -
WLAN Enable
Wi-Fi Direct Push Button
PIN Code
Manual
Group Owner
Device Info.
Status Info.
I/F Enable
IPsec -
Network Reset -
1 On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the 'Boot Method' of the machine is set to 'Static' you must manually enter an IP address from the machine's control panel.
[Factory Reset] (Available only for certain models)
Description
Reset the machine and restore the printer settings (including command settings) to the factory settings.
[Reset Menu] (Available only for certain models)
Level 1 Description
Network Restore all network settings of your machine to the factory settings.
Factory Reset Reset the machine and restore the printer settings (including command settings) to the factory
settings.
Related Information
• Settings and Features Tables
Level 3 Description
SSID Display SSID.
Comm. Mode Display the current Communication Mode.
- Display the MAC address of the machine.
Restore wireless network settings of your machine to the
factory settings.
- Turn the wireless interface on or off.
- Configure your Wi-Fi Direct network settings using the one-
button push method quickly.
- Configure your Wi-Fi Direct network settings using WPS with
a PIN code quickly.
- Configure your Wi-Fi Direct network settings manually.
- Set your machine as the Group Owner.
Device Name View your machine's device name.
SSID Display the Group Owner's SSID.
IP Address Display your machine's IP Address.
Status Display the Wi-Fi Direct network status.
Signal Display the current Wi-Fi Direct network signal strength.
When your machine acts as Group Owner, the LCD always
displays Strong.
Channel Display the channel in use when the Status is G/O
Active or Client Active.
Speed Display the connection speed when the Status is G/O
Active or Client Active.
- Enable or disable the Wi-Fi Direct connection.
- IPsec is an optional security feature of the IP protocol that
provides authentication and encryption services. We
recommend contacting your network administrator before
changing this setting.
- Restore all network settings of your machine to the factory
settings.
329