•
For more information about how to enter text, see the User's Guide.
•
Your Brother machine supports the use of the first WEP key only.
9. To apply the settings, press [Yes]. To cancel, press [No].
10. The machine will attempt to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the
Brother Solutions Center at
device.
Related Information
•
Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/n)
•
How to Enter Text on Your Brother Machine
•
Wireless LAN Report Error Codes
support.brother.com
to install drivers and software necessary for operating your
105