How To Navigate The Touchscreen Lcd - Brother HL-L6250DW Online User's Manual

Home > Introduction to Your Brother Machine

How to Navigate the Touchscreen LCD

Related Models: HL-L6400DW/HL-L6400DWT
Press your finger on the LCD to operate it. To display and access all the options, press a or b on the Touchpanel
to scroll through them.
The following steps explain how to navigate through changing the machine's setting. In this example, the LCD
Backlight setting is changed from [Light] to [Med].
IMPORTANT
DO NOT press the LCD with a sharp object such as a pen or stylus. It may damage the machine.
NOTE
DO NOT touch the LCD immediately after plugging in the power cord or turning on the machine. Doing this
may cause an error.
1. Press
[Settings].
2. Press a or b to display the [General Setup] option, and then press [General Setup].
Se ngs
General Setup
Print Menu
3. Press a or b to display the [Panel Control] option, and then press [Panel Control].
General Setup
Volume
Panel Control
4. Press [LCD Settings].
> How to Navigate the Touchscreen LCD
17