Basic Style - Pioneer XDJ-1000 Operating Instruction

Connections
! Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.
! Refer to the operating instructions for the component to be connected.
! Connect the power cord after all the connections between devices have been completed.
! When using a LAN cable for connection, be sure to use either the LAN cable included with this product or an STP (shielded twisted pair) cable.
! Do not disconnect the LAN cable when music files and/or information are being shared using PRO DJ LINK.

Basic style

Playback on this unit is performed mainly using tracks prepared with rekordbox installed on a computer.
! For instructions on operating rekordbox, see rekordbox (Mac/Windows)'s operating instructions. The rekordbox (Mac/Windows) operating instruc-
tions can be viewed from the rekordbox (Mac/Windows) [Help] menu.
! Also, for DJ players and DJ mixers, up to four PRO DJ LINK-compatible players can be connected with LAN cables (CAT5e) using PRO DJ LINK
connections.
! A switching hub (commercially available) may be necessary, depending on the combination of models used. Use a switching hub of 100 Mbps or
greater. Some switching hubs may not operate properly.
A switching hub (commercially available) is necessary to connect to a mixer equipped with only one LAN port. For mixers with enough LAN ports for
all the DJ players and computers in the system, connect directly to the LAN ports on the mixer's rear panel, without using a hub.
PRO DJ LINK (USB Export)
! rekordbox music files and data can be exchanged with this unit using a memory device (flash memory, hard disk, etc.), eliminating the need to take
a computer into the DJ booth. Such information as playlists, cues, loops and hot cues set in advance with rekordbox can be used for playback.
rekordbox
DJ player
Cautions
In order to maximize the use of music file management functions of rekordbox, please match the player number with the channel of audio cable
entered in the mixer.
If the player number is different, change the [PLAYER No.] setting on the [UTILITY] screen.
= For information on changing the settings of [UTILITY] screen, please refer to the operating instructions for this product published on the Pioneer
DJ support site.
! When a storage device is connected to this unit, [PLAYER No.] is displayed in gray and cannot be changed. Disconnect the storage device or LAN
cable to turn the link off, then change the setting.
Computer
Switching hub
LAN cable
LAN cable
Audio cable
Audio cable
DJ mixer
Mobile device USB device
on which on which
rekordbox is rekordbox
installed data is
recorded
LAN cable
L
R
Power cord
To power outlet
Rear panel
5
En