MULTI PLAYER XDJ-1000 http://pioneerdj.com/support/ The Pioneer DJ support site shown above offers FAQs, information on software and various other types of information and services to allow you to use your product in greater comfort. http://rekordbox.com/ For various types of information and services regarding rekordbox™, see the Pioneer website above.
Playing from the position on the waveform which was touched ..23 Using the beat sync function ..............23 Adjusting the beat grid ................23 Operating the XDJ-1000 in combination with other devices ....23 Browsing tracks ..................24 Other browsing operations ..............25 Checking the playing history (HISTORY) ..........
Before start At home or in a studio Features This unit is a DJ player equipped with the technology of the Pioneer CDJ series, the world standard for club players. You can play it like a real rekordbox DJ using the music stored on your USB device, computer or even on mobile devices (smartphones etc.).
Date:2011.11.5 looping, even if you perform operations off-beat, as long as the track Title:Pro DJ Music, has been analyzed with rekordbox. This enables accurate performances Artist: Pioneer without breaking the rhythm of the currently playing track. rekordbox SLIP MODE It has a sleep mode function which continues to play back the tracks Check and manage the playback history with rekordbox.
! Some USB devices may not operate properly. Please note that This unit supports USB mass storage class USB devices (external hard Pioneer will accept no responsibility whatsoever for loss of data disks, portable flash memory devices, digital audio players, etc.).
Internet. About rekordbox rekordbox is a software program allowing users who have purchased a Pioneer DJ player supporting rekordbox to manage music files to be used for DJ performances. Music file can be managed in various ways (analysis, setting, creation, history saving) by using the music management software rekordbox.
Connections ! Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. ! Refer to the operating instructions for the component to be connected. ! Connect the power cord after all the connections between devices have been completed. ! When using a LAN cable for connection, be sure to use either the LAN cable included with this product or an STP (shielded twisted pair) cable.
! This product is compatible with iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, and iPod touch (3rd, 4th, 5th generation). ! For the latest supported devices, see the below-mentioned Pioneer support DJ site. http://pioneerdj.com/support/...
Using a switching hub Computer Computer Mobile device on which rekordbox is installed rekordbox rekordbox LAN cable × 2 Switching hub LAN cable × 3 LAN cable Audio cable Audio cable × 3 DJ player × 3 DJ mixer Rear panel Power cord To power outlet...
USB cable to a computer on which MIDI-compatible DJ software is installed, the DJ software can be operated from the XDJ-1000. The sound of music files being played on the computer can also be output from the XDJ-1000. For details, see Installing the driver software on page 31 and Using other brands of DJ software on page 32 .
Part names and functions Control panel 1 PLAY/PAUSE f button 7 OUT (OUT ADJUST) button This lights when playing tracks and flashes when in the pause mode. Use this to set and fine-adjust the loop out point. = Pausing (p. 17 ) = Setting loops (p.
d BACK button Press this once to return to the previous screen. Press for over 1 second to move to the top layer. = Playing media connected to or inserted in this unit (p. 16 ) e STANDBY indicator This lights when in the standby mode. = Setting the auto standby mode (p.
! The BPM measured by this unit may differ from the BPM indi- 8 A. CUE cated on the audio source or that of a Pioneer DJ mixer, etc. This This lights when auto cue is set. is due to the different methods used for measuring the BPM, and = Setting auto cue (p.
f Loop beat display j Cue point, hot cue point and loop point display Beat count set in the loop is displayed. This displays the position of cue point, hot cue point and loop point that have been set using the mark. g Playing speed adjustment range display k Cue/loop point memories This indicates the range in which the playing speed can be adjusted...
d QUANTIZE f BEAT SYNC MASTER Touch to use the quantize function. Use this to set the track loaded in this unit as the master for the beat When the quantize function is set to on, the point is automatically sync function.
Basic Operation 2 Disconnect the USB device. Turning the power on 3 Close the cover of the USB device insertion slot. 1 Make all the connections, then plug the power cord into a power outlet. Playback = Connections (p. 7 ) This section describes basic track selection operations and how to 2 Press the [u] switch.
Playing music files on other DJ players Load previous tracks The contents of the mobile device in which rekordbox is installed, or The names of the last seven tracks that were played can be displayed storage device installed in other players connected to PRO DJ LINK, are and these tracks can be selected.
Adjusting the playing speed without Scratch changing the pitch (Master Tempo) When the jog mode is set to the VINYL mode, tracks can be played according to the direction and speed at which the jog dial is spun by spinning the top of the jog dial while pressing it. 1 Press the [MASTER TEMPO] button.
Advanced Operation Setting Cue Setting loops This function can be used to play specific sections repeatedly. 1 During playback, press the [PLAY/PAUSE f] button. ! When the quantize function is on, there may be a slight delay in Playback is paused. operation of this function in order to synchronize the beat.
Returning to Loop playback (Reloop) Emergency loops With this unit, a 4-beat loop is set automatically to prevent the sound After canceling loop playback, press the [RELOOP/EXIT] from being interrupted if a track can no longer continue to play. button during playback. ! DJ playback is restricted during emergency looping.
Calling out hot cues Deleting stored cue or loop points 1 Load the track whose hot cue you want to call out. 1 Load the track containing the cue point or loop points you want to delete. 2 Touch [PERFORM]. 2 Touch [CUE/LOOPCALLc] or [CUE/LOOPCALLd] to call 3 Touch [HOT CUE (CALL)].
Slip scratching Using loop move The playback position of the loop can be moved according to the length 1 Press the [JOG MODE VINYL] button. of the selected beat. Set the jog mode to VINYL. = Switching the jog dial mode (p. 18 ) 1 Set the loop.
LAN cable. For instructions on connecting, see Basic style on page 7 . ! If the Pioneer DJ mixer does not have a LAN port, connect a mini phone plug cable (Ø 3.5 mm) to the CONTROL terminal. 2 Turn on the DJ mixer’s fader start function.
Moving back up to a higher layer Searching using the currently playing track’s key Press the [BACK] button while the browser screen is displayed. When the displayed category is the key display, the key icon for tracks The screen moves back to the layer above. whose keys are a good match with the currently playing track’s key ! When the [BACK] button is pressed for over 1 second or the media switches to green.
Checking the playing history Editing tag lists (HISTORY) Tracks to be played next or tracks selected according to DJ situations can be marked and collected on lists. The list of collected tracks is called The track playing history is stored and displayed at the [HISTORY] cat- the “tag list”.
Adding entire categories or folders Removing one track at a time All the tracks in a selected category or folder can be added to the tag list. 1 Touch [TAG LIST]. 1 Switch to the browse screen and select a category or The tag list is displayed.
Displaying the details of the Displaying details of tracks loaded currently loaded track in other DJ players The details of the currently loaded track can be checked. When another DJ player is connected by PRO DJ LINK, the details of the track loaded on the other DJ player can be checked.
Changing the settings Storing settings on USB devices Displaying the [UTILITY] screen The [UTILITY] settings and other settings can be stored on USB devices. Touch [MENU (UTILITY)] for over 1 second. The stored settings can be exported to rekordbox. The [UTILITY] screen is displayed. It is also possible to store this unit’s settings on USB devices after mak- ing them with rekordbox then load these settings onto another player.
2 Use the rotary selector to select and enter [AUTO Options Setting ranges Descriptions STANDBY]. settings Sets whether or not to display the 3 Use the rotary selector to select and enter [ON] or tracks’ ON AIR status on the main [OFF].
3 Click the icon of the driver software to download the default settings driver software from the download page. ! For information on installing the driver software, see the Pioneer Set the kernel buffer size to , then set the buffer DJ support site.
64 for stop, 65 (0.06X) – 127 JOG (TOUCH) — (4X) in the forward direction, output from the XDJ-1000. 63 (0.06X) – 0 (4X) in the To use this unit as an audio device, install the driver software on the reverse direction.
Sometimes the problem may lie in another component. Inspect the other components and electrical appliances being used. If the problem cannot be rectified, ask your nearest Pioneer authorized service center or your dealer to carry out repair work. ! This unit may not operate properly due to static electricity or other external influences. In this case, proper operation may be restored by turning the power off, waiting 1 minute, then turning the power back on.
! Compatibility with this product may be lost if a version other than the one indicated on the Pioneer support DJ site is installed on your iPod/iPhone. ! Note that Pioneer does not offer any guarantee regarding the operation of iPod/iPhone.
Trademarks, licenses, etc. ! Pioneer rekordbox, and KUVO are trademarks or registered trade- marks of the PIONEER CORPORATION. ! Windows is a registered trademark of Microsoft Corporation in the United States and other countries. ! Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.