Clock Functions - Zanussi ZOP37902 User Manual

Clock functions

Clock functions table
Clock function
TIME OF DAY
MINUTE MINDER
DURATION
END
Press again and again to switch
between the clock functions.
To confirm the settings of the clock
functions, press
seconds for an automatic
confirmation.
Setting the DURATION or END
1. Press again and again until the display
shows or
or flashes in the display.
2. Press or to the set the values and
press to confirm.
For Duration first you set the minutes and
then the hours, for End
hours and then the minutes.
An acoustic signal sounds for 2 minutes after
the time ends. or
setting flash in the display. The oven stops.
3. Turn the knob for the oven functions to the
off position.
4. Press any button or open the oven door to
stop the acoustic signal.
If you press
hours for DURATION
appliance goes to setting of the
END function.
www.zanussi.com
To set, change or check the time of day. Refer to "Setting the
time".
Use to set a countdown time (maximum 23 h 59 min). This func-
tion has no effect on the operation of the appliance. You can set
the MINUTE MINDER at any time, also if the appliance is off.
To set how long the appliance operates. Use only when an oven
function is set.
To set when the appliance must deactivate. Use only when an
oven function is set. You can use Duration and End at the same
time (time delay), if the appliance is to be activate and deactivate
automatically later.
or wait 5
.
first you set the
symbol and time
when you set the
, the
Application
Setting the MINUTE MINDER
1. Press again and again until
flash in the display.
2. Press or to set the MINUTE
MINDER.
First you set the seconds, then the minutes
and then the hours.
At first, the time is calculated in minutes and
seconds. When the time you set is longer
than 60 minutes, the symbol
in the display.
The appliance now calculates the time in hours
and minutes.
3. The MINUTE MINDER starts automatically
after five seconds.
After 90% of the set time, an acoustic
signal sounds.
4. When the set time ends, an acoustic signal
sounds for two minutes. "00:00" and
flash in the display. Press any button or
open the oven door to stop the acoustic
signal.
If you set the MINUTE MINDER
when the DURATION
function operates, the symbol
comes on in the display.
and "00"
comes on
or END
9