Table of Contents
Advertisement
It is simple to deploy and create a mesh network with the EWS controller or ezMaster software in minutes. For stand-alone mode, without
these two applications, the user needs to configure the same settings of the Mesh network in each device once the EWS550AP is plugged
into any power source. The EnGenius mesh devices automatically optimize routes between wireless mesh devices and creates a truly
adaptive mesh infrastructure with other mesh devices in the system. As the wireless environment changes, such as the addition of a new
node or broken link, data paths are re-evaluated, and the mesh network self-tunes automatically to maintain its performance. All
self-tuning processes are dynamic, occurring in the background and in real time.
Status
Shows the current status of the mesh network, such as Enable/Disable, Interface, ID, Channel, and Type.
For this mesh device list, the system will display the information as device name, MAC address, and IP address, which are connected to the mesh
network. You can click the "Refresh" button to get a new status again.
Advertisement
Table of Contents
