Table of Contents
Advertisement
Basic
Wireless Settings
Device Name: Enter a name for the device. The name you type appears in SNMP management. This name is not the SSID and is not broadcast
to other devices.
Band Steering: Enable Band Steering to send 802.11a/n/ac clients to the 5 GHz band, where 802.11b/g clients cannot go, and leave 802.11b/g
clients in 2.4 GHz to operate at their slower rates. Before implementing this feature, we suggest you to assure the both 2.4 GHz and 5 GHz SSID,
as well as security settings must be the same. EnGenius Band Steering supports the following advanced settings:
*Force 5 GHz: When band steering is configured to Force 5 GHz mode, the AP will connect dual band capable client devices to the 2.4 GHz band
only if the client devices are not currently associated on 2.4 GHz radio in this AP.
Advertisement
Table of Contents
