Table of Contents
Advertisement
Transmit Power (Tx Power): Default Tx power is Auto set to obey regulatory power of each country.
Channel: Click Configuration button to open a new window to configure channels for performing wireless service.
*Default Configuration: Default setting of channel selection is "All" to perform auto channel on existing channel list.
*None: Click "None" to disable the setting on this radio. This radio is disabled.
*Group Configuration: Click specific groups of channels for performing auto channel function. For example, users can click U-NII-1 and U-NII-3
to perform auto channel on these bands; the mechanism of this AP will select the relatively optimal channel to perform the wireless service.
Data Rate: Select a data rate from the drop-down list. The data rate effects throughput of data in the AP. Select the best balance for you and
your network, but note that the lower the data rate, the lower the throughput. The though transmission distance is also lowered.
RTS/CTS Threshold: Specifies the threshold package size for RTC/CTS. A small number causes RTS/CTS packets to be sent more often and
consumes more bandwidth.
Client Limits: Limits the total number of clients on this radio. Once you set the ceiling of client numbers allowed, the maximum associated
client devices will be restricted to this number.
Aggregation: Integrate multiple data packets into one packet to deliver to client devices. This option reduces the number of packets, but also
increases packet sizes.
AP Detection: AP Detection can select the best channel to use by scanning nearby areas for Access Points.
Distance: Specifies the distance between Access Points and client devices. The proper setting for this parameter may assist Access Points in
avoiding the improper operation when transmitting data under a filed application.
Save: Click Save to confirm the changes or Cancel to return to the previous settings.
Advertisement
Table of Contents
