Physical Interface
4
5
3
1.
LED Indicators: LEDs for Power, Uplink, 5 GHz, 2.4 GHz, PoE Out, Reserve
2.
Reset Button: Press, hold for over 10 seconds to reset to factory default settings
3.
10/100/1000 LAN Ports: Two RJ45 access ports
4.
10/100/1000 LAN Port (PoE Out): RJ45 access port with PoE Out (support 802.3af output when PoE input is 802.3at)
5.
RJ45 Pass Through Port: Pass through port
6.
10/100/1000 RJ45 Uplink (PoE In): Uplink port that supports 802.3af/at PoE input
7.
110 Punch Down Block
2
1
7
6
5