Table of Contents
Advertisement
Management VLAN Settings
This section allows you to assign a VLAN tag to the packets. A VLAN is a group of computers on a network whose software has been
configured so that they behave as if they were on a separate Local Area Network (LAN). Computers on a VLAN do not have to be physically
located next to one another on the LAN.
Status: If your network includes VLANs and if tagged packets need to pass through the Access Point, select Enable and enter the VLAN ID.
Otherwise, click Disable.
Save: Click Save to apply the changes.
Note: If you reconfigure the Management VLAN ID, you may lose your connection to the Access Point. Verify that the DHCP server supports
the reconfigured VLAN ID and then reconnect to the Access Point using the new IP address.
Advertisement
Table of Contents
