Table of Contents
Advertisement
Assembly Instructions
PRE-ASSEMBLY
1.
Using a razor knife (Box Cutter), cut the banding straps that wrap around the carton. Reach
under the bottom edge of the carton and pull it away from the cardboard underneath,
separating the staples that join the two together. Lift the box over the unit and unpack.
2.
Carefully remove all parts from carton and inspect for any damage or missing parts. If
damaged parts are found, or parts are missing, contact your dealer immediately.
3.
Locate the hardware package. The hardware is separated into four steps. Remove the tools
first. Remove the hardware for each step as needed to avoid confusion. The numbers in the
instructions that are in parenthesis (#) are the item number from the assembly drawing for
reference.
Assembly Tools
#158. 12/14mm Wrench (1 pc)
#155. 13/14mm Wrench (1 pc)
#157. Phillips Head Screw driver (1 pc)
5
Advertisement
Table of Contents
