Table of Contents
Advertisement
Using A Heart Rate Transmitter
How to wear your wireless chest strap transmitter:
1.
Attach the transmitter to the elastic strap using the locking parts.
2.
Adjust the strap as tightly as possible as long as the strap is not too
tight to remain comfortable.
3.
Position the transmitter with the logo centered in the middle of your
body facing away from your chest (some people must position the
transmitter slightly left of center). Attach the final end of the elastic
strap by inserting the round end and, using the locking parts, secure
the transmitter and strap around your chest.
4.
Position the transmitter immediately below the pectoral muscles.
5.
Sweat is the best conductor to measure very minute heart beat
electrical signals. However, plain water can also be used to pre-wet the electrodes (2 ribbed
oval areas on the reverse side of the belt and both sides of the transmitter). It's also
recommended that you wear the transmitter strap a few minutes before your work out. Some
users, because of body chemistry, have a more difficult time in achieving a strong, steady
signal at the beginning. After "warming up", this problem lessens. As noted, wearing clothing
over the transmitter/strap doesn't affect performance.
6.
Your workout must be within range - distance between transmitter/receiver – to achieve a
strong steady signal. The length of range may vary somewhat but generally stay close enough
to the console to maintain good, strong, reliable readings. Wearing the transmitter immediately
against bare skin assures you of proper operation. If you wish, you may wear the transmitter
over a shirt. To do so, moisten the areas of the shirt that the electrodes will rest upon.
Note: The transmitter is automatically activated when it detects activity from the user's heart.
Additionally, it automatically deactivates when it does not receive any activity. Although the
transmitter is water resistant, moisture can have the effect of creating false signals, so you should
take precautions to completely dry the transmitter after use to prolong battery life (estimated
transmitter battery life is 2500 hours). The replacement battery is Panasonic CR2032.
ERRATIC OPERATION
Caution! Do not use this
value is being displayed. High, wild, random numbers being displayed indicate a problem.
Areas to look for interference which may cause erratic heart rate:
1.
Microwave ovens, TV's, small appliances, etc.
2.
Fluorescent lights.
3.
Some household security systems.
4.
Perimeter fence for a pet.
5.
Some people have problems with the transmitter picking up a signal from their skin. If you
have problems try wearing the transmitter upside down. Normally the transmitter will be
oriented so the logo is right side up.
6.
The antenna that picks up your heart rate is very sensitive. If there is an outside noise source,
turning the whole machine 90 degrees may de-tune the interference.
7.
Loose
Elliptical
8.
Another Individual wearing a transmitter within 3' of your machine's console.
If you continue to experience problems contact your dealer.
elliptical
for Heart Rate Control unless a steady, solid Actual Heart Rate
console or bolts in the upright tube.
(OPTIONAL)
23
Advertisement
Table of Contents
