Fujitsu CELVIN NAS QE705 Operating Manual page 53

► Connect the USB webcam to the NAS USB port.
If the webcam is supported, it will be listed in an entry of the system log undersystem settings-
system logs.
► Install the app QUSBCam so that the USB webcam can be used with the NAS.
► For this, open the Recommended category in the App Center.
► Search for QUSBCam
► Click Download.
QUSBCam is installed.
► To configure settings click onOpen.
► Log in with the user admin and the corresponding password (admin).
A maximum of two USB webcams can be used at the same time per NAS
i
Set up Surveillance Station
► To configure the IP cameras log on to Surveillance Station Pro via a web browser.
► Go to Camera Settings - Camera Configuration.
► Enter the IP camera information, e.g. name, model and IP address.
► If you are using a USB webcam, enter the following values:
Field
Camera brand
Camera model
HTTP URL
IP address
Port
User name
Password
► To check whether the IP address or USB webcam can be successfully connected, click on Test.
► If your IP camera supports audio recordings, you can switch on the option at recorder settings.
► Click "Apply" to save the changes.
► Configure the settings of Camera 2 following the above steps.
► After you have added the network cameras to the NAS, click on Monitor.
► If you are accessing this page for the first time with a web browser, you must install additional
plug-ins to display the image.
You can now use the Surveillance Station monitoring and recording functions.
Further information e.g. on motion detection recording, schedule recording and video
i
playback can be found in the software's online help.
Fujitsu
Values
Generic model
Generic JPEG
/video0.cgi
localhost
8168
root (random entry)
----- (random entry)
Surveillance station
47