System Status Checks - Fujitsu CELVIN NAS QE705 Operating Manual

Installing the NAS

System status checks

The NAS is fitted with LED indicators to show the system status and further information. When the
NAS is switched on, check the following items to make sure that the system is working normally.
Please note that the information provided by the LEDs described below is only valid if the hard disks
have been correctly installed and the NAS is connected to the network and the power supply.
The following illustration shows the CELVIN
i
1
2
3
4
1 = System-Status
2 = LAN
3 = USB
4 = HDD 1 - 2 (QE705)
HDD 1 - 4 (QE805)
12
STATUS
LAN
USB
HDD1
HDD2
HDD3
HDD4
®
NAS QE805.
Fujitsu