Beko L6B PDP TV Service Manual page 27

Connecting a decoder
Via SCART
Make sure the TV and decoder are both switched
off.
Plug one end of the SCART lead (not supplied)
into the back of the decoder and the other end
into the SCART on the back of the TV.
Switch on the decoder and the TV.
Press the ( ) button on the remote control
to select SCART1.
Via RCA lead
Make sure the TV and decoder are both switched
off.
Note: For Decoder connection Via RCA lead
your Decoder device must have the tuner built
in.
Audio In (R)
Audio In (L)
Video In
Plug one end of the RCA lead into the video and
audio out sockets on the back of the decoder
and plug the other end into the video and audio
in sockets on the TV.
Connecting DVI-D
Your TV has DVI-D input socket. You can connect
any device such as PC etc. which has DVI digital
out using the proper cable. At the same time you
can listen to the sound from the connected device.
PC or DVI use a special cable to PC-DVI/AUDIO
IN input at the back of your TV.
AV Outputs
You can connect any device which is proper to
Phono inputs via Phono Video and Audio Outs
at the back of your TV set using proper AV cable
(not available with the set).
Any programme or AV input which is seen on
the main screen other than S-VHS, PC or DVI
(which is option) is available as picture and sound
signals at Phono Video/Audio outs.
Scart sockets at the back of your TV set are always
give the signals of selected programme from the
set Tuner.
SCART - 2 SPEAKER OUT
AV IN
SCART - 1
ANT VIDEO
SVHS
AV OUT
L R VIDEO L R