Table of Contents
Advertisement
Beko Elektronik A.S
2. PRECAUTIONS
** To prevent the risks of unit damage, electrical shock and radiation, take the
following safety, service, and ESD precautions.
2-1 Handling Precautions for Plasma Display
PDP module use high voltage that is
n
dangerous to human. Before operating
PDP, always check the dust to prevent
circuit short. Be careful touching the
circuit device when power is on.
PDP module is sensitive to dust and
n
humidity. Therefore, assembling and
disassembling must be done in no dust
place.
PDP module has a lot of electric
n
devices. Service engineer must wear
equipment(for example , earth ring) to
prevent electric shock and working
clothes to prevent electrostatic.
2-2 Safety Precautions for Service (Handling, prevention of a electrical shock, measure
against power outage, etc)
Service Manual
5 / 44
Plasma Display Module-Samsung V3
PDP module use a fine pitch connector
n
which is only working by exactly
connecting with flat cable. Operator
must pay attention to a complete
connection when connector is
reconnected after repairing.
The capacitor's remaining voltage in
n
the PDP module's circuit board
temporarily remains after power is off.
Operator must wait for discharging of
remaining voltage during at least 1
minute.
Advertisement
Table of Contents
