Table of Contents
Advertisement
Beko Elektronik A.S
2. Assembling Procedures
1) Push the lead of FPC with same strength until to be connected completely.
* Notice : Be careful do not get a damage on the connector pin during connecting by mistake.
5-3-2 Assembling & Disassembling of Flat Cable Connector of X-Main Board
1. Disassembling Procedure
1) Pull out the clamp of
connector.
2. Assembling Procedure
Service Manual
2) Pull Flat cable out
press down lightly.
35 / 44
Plasma Display Module-Samsung V3
3) Turn the Flat
cable
reversely.
Advertisement
Table of Contents
