Table of Contents
Advertisement
Beko Elektronik A.S
Service Manual
Plasma Display Module-Samsung V3
8) Reassemble the YBU and YBL to the Y-Main.
9) Connect the connector of CN5006 and CN5007 among YBU, YBL and YM.
10) Arrange the board on the chassis and then screw to fix.
11) Connect the FPC and YM of panel to the connector.
12) Supply the electric power to the module and then check the waveform of board.
13) Turn off the power after the waveform is adjusted.
40 / 44
Advertisement
Table of Contents
