Operation Check; Adjustment Specification, Checking Position Etc - Beko L6B PDP TV Service Manual

Beko Elektronik A.S
9) Check the Low-discharge, Over-discharge and panel condition by adjusting the Pattern Generator Level.

7. Operation Check

7-1 Adjustment Specification, Checking Position etc.

V3.1 TCP Ramp Waveform Inclination Adjustment ( Y-Board )
Adjust VR5002 to set the time of Vset
Adjust VR5002 to set the time of
Vset in
* Dip Switch Mode
Service Manual
in 10㎲
10㎲
1 2 3
< Internal >
Plasma Display Module-Samsung V3
Adjust VR5004 to set the voltage of
Adjust VR5001 to set the 3SF Falling
1
4
42 / 44
Vsch in 40V
time in 30㎲
2 3 4
<External>