Dispenser Micro Switch - Daewoo FRN-U20IE series Service Manual

7-3. Dispenser Micro Switch

1) Disassembling Procedure
NO DISASSEMBLING PROCEDURE
1
▷ Insert (-) screw driver into bottom hole of
Dispenser Button Guide.
Pull up forward to remove the guide.
(Be careful not to damage guide surface.)
2
▷ Remove Micro switch.
2) How to Check Micro Switch
PARTS
SPEC. NAME
: VP333A-OD-8
VOLTAGE
:125V,3A
▷Check both terminals
(red circle) with a Multi Tester
(Tester Mode : Resistance (Ω).
HOW TO CHECK
NO DISASSEMBLING PROCEDURE
3
▷Separate wire connectors
from Micro Switch.
4
▷Check Micro Switch.
▷GOOD :
Tact Switch
(Blue Circle)
ON (Close)
OFF (Open)
▷DEFECTIVE :
Change Micro Switch.
44
CRITERION
Terminals Tester Result
(Red circle) (Resistance Mode)
Connected Some Value
Disconnected No value (0)