Advertisement

Available languages

Available languages

Be sure to keep for safety !

Read these safety instructions thoroughly and carefully before using. Please keep this user guide to
hand for future reference.
Indicates the possibility of danger of
death or serious injury

WARNING

Other Signs

DO NOT remove or disassemble!
Be sure to unplug from receptacle(outlet/mains)!
1. If the supply cord becomes damaged, it must be replaced by the manufacturer or its service agent
Caution
or a similarly qualified person in order to avoid a hazard.
2. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Never let the power cord be crushed
by the refrigerator itself or other (heavy)
objects.
Never bend power cord excessively.
If the cord is damaged or peeled, it can be a
cause of fire and electric shock.
Never hold the power cord or plug with wet
hands.
There is a risk of electric shock.
Be sure to ground. Check if your wall outlet
is grounded (earthed) .
There is a risk of electric shock hazards.
Indicates the possibility of risk of personal
injury or material damage
CAUTION
NO., DO NOT...
Be sure to keep and follow!
WARNING
Do not plug several appliances into the
same wall outlet (receptacle).
It can be a cause of overheating and/or fire.
Use an exclusive grounding receptacle for
the refrigerator.
Never use a damaged power cord or plug,
or loose main socket .
There is a risk of fire, electric shock or
serious injury.
Never unplug by pulling only the power cord
wire. Always grip the plug firmly.
1

Advertisement

Table of Contents
loading

Summary of Contents for Daewoo FRN-U20D

  • Page 1: Be Sure To Keep For Safety

    Be sure to keep for safety ! Read these safety instructions thoroughly and carefully before using. Please keep this user guide to hand for future reference. Indicates the possibility of danger of Indicates the possibility of risk of personal death or serious injury injury or material damage WARNING CAUTION...
  • Page 2 WARNING Do not install the refrigerator on a wet Let the cord from the plug outlet be floor or in a place with much humidity directed Downwards. moisture. If it is directed up, the cord near the plug is Electric insulation gets weakened, bent and can be damaged, which can resulting in a risk of electric shock cause an electric shock or fire.
  • Page 3 WARNING Do not store medicine, academic research Never insert fingers or hands into the bottom samples which require strict temperature of refrigerator, especially into the bottom control in the refrigerator. back. You can be hurt by sharp metal edges or can receive an electric shock.
  • Page 4: Installation Guide

    If you hear a strange noise or strong chemical odour or find smog etc. from the refrigerator after power plugin, pull out the plug immediately and call the service agent or DAEWOO customer service Dept.. Wait about 5 minutes before you plugin again in order to prevent any damage to the compressor and electrical devices of refrigerator.
  • Page 5: Control Panel

    Control Panel Dispenser Model After 6 month of first power input, ‘CHANGE FILTER’ For your convenience you can select WATER, CRUSHED ICE, icon is ON. CUBED ICE and ICE MAKER LOCK. When the time comes to change the filter or reset; The icon lights up to indicate your selection is ON.
  • Page 6: Temperature Control

    Temperature Control When this refrigerator is first plugged in, the temperature mode is set to [Middle]. Dispenser Model Freezer Compartment Refrigerator Compartment Push the “Freezer” button and the setting Push the “Refrigerator” button and the setting temperature changes as the figure shows. temperature changes as the figure shows.
  • Page 7 How To change the lnterior Light Bulb The lamp shall be replaced only by a service agent or similarly qualified person. Change of Freezer Lights Hold the botton of the light cover Change the light bulb. Remove the 2 screws and pull forward to remove.
  • Page 8: How To Use The Interior Parts

    How to use the interior parts Basic Model Interior Parts ❈ Features are model - dependent. Dispenser Model Interior Parts ❈ Full - option models illustrated. Features are model - dependent.
  • Page 9: Food Storage Tips

    Do not touch or hold with wet hands foods (foods container) in the freezer compartment. Caution There is a risk of chilblains (cold burn) Do not store medicine, academic research samples etc. in the refrigerator Do not store vegetables in the chilled room, for they can be frozen. Egg case can be placed on a refrigerator shelf as you like.
  • Page 10: How To Use The Dispenser

    Magic cool zone (Option) Magic cool zone Contol graphic and Control function When you plug in first, “OFF” LED is ON. You can choose “OFF” “VEGETABLE” “FISH” “MEAT” by pushing the “SELECT” button. Step Display VEGETABLE 3 ºC FISH -1 ºC MEAT -3 ºC The LEDs and temperatures indicate what you have selected.
  • Page 11: How To Use The Automatic Icemaker

    How to use the Automatic Icemaker (For Dispenser models) About 10 icecubes (7~8 times a day) are made at one time. If the ice storage case is full, icemaking stops. It is normal for the icemaker to make banging sounds when the icecubes are falling into the ice storage case. To prevent a bad odour or smells, regularly clean the Icecubes Storage Case.
  • Page 12 Care & Cleaning Be sure to unplug first ! ❈ Full - option models illustrated. Dispenser Water Shelf Remove the spill grill and clean the water shelf regularly. Icecubes storage Case ( The spill shelf is not self-draining.) Removing ; Pull up the case assembly forward to remove.
  • Page 13: Interior Parts

    Dairy Pocket How to Clean Diary Pocket Cover ; Open the cover a little, hold both ends and push left to remove. Interior Parts Diary Pocket ; Hold both ends and pull upward to remove. Use cloth with water and mild(neutral) detergent to clean.
  • Page 14: Before You Call For Service

    Before You Call for Service... Please checkup the following troubleshooting tips before you call for service ! Problem Checkup Point Action It never gets cold inside. Is the refrigerator unpluged ? Plug in the refrigerator. Freezing & refrigerating is Is the temperature set to [Low Mode] ? Set the temperature mode to Middle or High.
  • Page 15: Something Strange

    Something strange ? Don t worry. Here is the answer. Case Explanation Pipes (refrigerant vessel) are placed beneath the Front and side of refrigerator feels surface to prevent moisture forming on it. warm or hot. When you close the door and then open again immediately,the door is not easy to open.
  • Page 16: Installation Preparation

    Installation Preparation Check if the refrigerator can pass a doorway or enter a door first. Dimensions (including Door Handles) 903mm 734.5mm 1790mm (Width*Depth*Height) Find a suitable place to install Sufficient space from refrigerator back to the wall for free Avoid direct sunlight. air ventilation Once the installation place is ready follow the installation instructions.
  • Page 17: If The Refrigerator Can Not Pass Through A Door

    If the refrigerator can not pass through a door during installation, follow these steps. Removing Freezer Door Remove front bottom cover first, if it is attached. Remove the bottom cover first. Unscrew top hinge cover with a Turn top hinge fastener Pull out the left collar of the coupling screw driver.
  • Page 18 Replacing Freezer Door Insert the water tube into the hole of the Insert the bottom hole of freezer door Let the top of door close to the bottom hinge pin first (Dispenser straight to the bottom hinge pin. cabinet and insert the top hinge pin Models Only).
  • Page 19: Front Cover

    Refrigerator Leveling & Door Adjustment ( If needed. ) Refrigerator must be level in order to maintain optimal performance and desirable front appearance. (If the floor beneath the refrigerator is uneven, freezer and refrigerator doors look unbalanced.) In case freezer door is lower than refrigerator door... Insert a screw driver (flat tip) into a groove of the left wheel (bottom of freezer) and turn it clockwise until the door is balanced.
  • Page 20 How to install Water Line (Dispenser Models Only) 1. The water pressure should be 2.0~12.5kgf/cm or more to run the automatic icemaker. WATER SUPPLY KIT Checkup your tap water pressure ; if a cup of 180cc is full within 10 seconds, the pressure is OK. Check the parts below for installing water supply.
  • Page 21 3. Remove any substances in the filter. 1) Open the main tap water valve and check if water comes out of the Water Tube. 2) Check if the Water Valve is open in case water does not come out. 3) Leave the valve open until clean water is coming out. Initial water may contain some substances out of filter (manufacturing process).
  • Page 22 min. 50 Abstandshalter montieren Montera avståndshållare Befestigen Sie die beiliegenden Abstands Fäst medföljande avståndshållare med skruvar halter mit den Schrauben an den dafür i därför avsedda öppningar på apparatens vorgesehenen Öffnungen auf der Geräte baksida. Därigenom hålls minsta föreskrivna rückseite. Dadurch wird der Mindestabstand avstånd till väggen och tillfredsställande zur Wand eingehalten und die Entlüftung ist ventilation garanteras.

Table of Contents