Replace Intelli-Time; Battery - ACU-RITE 01605 Instruction Manual

*To change from AUTO to MANUAL pressure mode and vice versa, press
AND HOLD the "
the current pressure mode selected,"AUTO" or "MANUAL".
After 20 seconds of inactivity, the display will save the adjustments and exit
calibration mode. Note: Calibrations will be erased if the display is reset or if
batteries are removed and the power adapter is unplugged.

Replace Intelli-Time

Intelli-Time technology is powered by a pre-installed coin-cell battery that stores
the time and date settings. The battery has a shelf life of several years. To
replace the Intelli-Time battery:
1. Locate the coin cell battery compartment door on the back of the display
unit. Unscrew and remove
the compartment cover.
2. Insert 1 x CR2032 coin
cell battery into the battery
compartment, as shown.
Install battery with "+"
positive terminal facing
OUT.
3. Screw in the battery cover.
" button for at least 10 seconds. The display indicates
Clock Battery
®
16
CR2032
3V