Table of Contents
Advertisement
Package Checklist
Verify that your package contains the following:
FrameSaver FLEX unit
Power cord with a wall-mount 120 Vac power transformer
Self-mounting tie wrap for power cord strain relief
RJ48S modular cable for U.S. network access
FrameSaver FLEX 9623 Quick Reference (Document No. 9623-A2-GL10)
Be sure to register your warranty at www.paradyne.com/warranty.
Before You Begin
Make sure you have:
A dedicated, grounded power outlet that is protected by a circuit breaker within
6 feet of the FrameSaver unit
A clean, well-lit, and ventilated site that is free from environmental extremes
One-to-two feet of clearance for cable connections
A physical connection to the frame relay DDS network
An asynchronous terminal or PC (personal computer)
If desired, an operable Ethernet LAN (Local Area Network) connection for access
by an NMS (Network Management System)
Configuration information for the FrameSaver unit being installed or replaced
Appropriate cables:
— Ethernet cable
— Data port cable
— COM port-to-terminal or COM port-to-PC cable
See the User's Guide for additional information on:
Troubleshooting
Connectors, Cables, and Pin Assignments
Technical Specifications
2
Advertisement
Table of Contents
