Setting Communication Control 3 - Kyocera ECOSYS M6026cdn Service Manual

Item No.
U632

Setting communication control 3

Description
Makes settings for fax transmission regarding the communication.
Method
1. Press the start key.
2. Select the item to be set using the cursor up/down keys.
Display
DIS 4Byte
Num OF CNG(F/T)
Setting the DIS signal to 4 bytes
Sets if bit 33 and later bits of the DIS/DTC signal are sent.
1. Select the setting using the cursor up/down keys.
Display
On
Off
* : Initial setting: Off
2. Press the start key. The setting is set.
Setting the CNG detection times in the fax/telephone auto select mode
Sets the CNG detection times in the fax/telephone auto select mode.
1. Select the setting using the cursor up/down keys.
Display
1Time
2Time
* : Initial setting: 2Time
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Sets the DIS signal to 4 bytes.
Sets the CNG detection times in the fax/telephone auto select
mode.
Description
Bit 33 and later bits of the DIS/DTC signal are not sent.
Bit 33 and later bits of the DIS/DTC signal are sent.
Description
Detects CNG once.
Detects CNG twice.
1-3-60
2PV/2PW